The pre-2026-08-04 scan data was wrong in two systematic ways, and acting on
it wasted real time. Re-measured everything with tools/ against all 59 songs.
* Eleven tracks marked "WorkSheet 无 X 字段" do have the field, several with
substantial data: MobControlKeys (2392 keys), CyalumeControlKeys (2372),
nodeScaleList (57/59 songs), monitorCameraPos/LookAtKeys, sweatLocatorList,
facialNoiseKeys, charaMotionNoiseKeys, LipSyncPattern*, and the multi-camera
bloom keys. These are "just needs a C# declaration", not blocked.
* Six tracks marked "全 0 keyframe 空占位" carry thousands of keys. PostFilm
is the worst case at ~20200 keys over 59/59 songs; live-shader-todo.md was
right to rank it first and LIVE_TRACKS.md was wrong to write it off.
Rows that have been re-measured are tagged ✅实测; untagged rows are still old
data and should be re-verified before anyone acts on them. Priorities are now
ordered by measured data volume crossed with the kind of work required.
Also recorded:
* The stage shader colour/brightness channel table, and the warning that a
material's m_SavedProperties lists properties its current shader no longer
has — enumerate the shader, never trust that table.
* A working rule: no ground truth, no implementation. Guessing cost two wrong
PostFilm vignette implementations before it turned out the defining shader
is not shipped in any bundle. Note that "the property exists" is not "this
field maps to that property" — that distinction is why BgColor1's power ->
_ColorPower write was reverted while BlinkLight's was kept.
* A 「已知未解问题」 section splitting open items into: has ground truth so
can be built, lacks it so disabled, and rendering problems unrelated to the
timeline (the stage floor blowing out predates all of this work; the small
bulbs render black because their shaders expose no colour property at all).
* Song 1177 (stage live10149) is the reference song used throughout. Earlier
notes said 1157, which was wrong — that song uses stage live10146.
* The old UmaCrack tool paths are gone; tools/ replaces them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
13 KiB
CLAUDE.md
This file provides guidance to Claude Code (claude.ai/code) when working with code in this repository.
Project Overview
UmaViewer is a Unity application (2022.3.62f1) that loads and displays assets from Uma Musume: Pretty Derby. It reads encrypted asset bundles directly from the game installation without modifying game files.
Development
Open the project: Unity Hub → Add → C:\Users\riten\Desktop\UmaBuild
Run: Open Assets/Scenes/Version2 scene → Play in Unity Editor
Build: File → Build Settings → PC Standalone → Build
No CLI build commands — Unity Editor is required.
Game Data & Asset Pipeline
Game assets are encrypted. Key files:
meta(SQLite-MC ChaCha20 encrypted) — maps bundle names → hash filenames indat/dat/{2-char-prefix}/{hash}— encrypted asset bundles, each with a per-bundle XOR key from meta
Bundle decryption (UmaAssetBundleStream.cs): header (first 256 bytes) is plain; bytes ≥256 are XOR'd with FKey = ABKey[i] XOR bundleKey_bytes[j].
meta DB decryption: UmaDatabaseController.ReadMetaFromEncryptedDb() uses sqlite3mc_x64.dll with cipher=3 (ChaCha20). Final key = DBKey[i] XOR DBBaseKey[i % 13].
Asset bundle paths (key formats):
- Live cutt timelines:
cutt/cutt_son{music_id}/cutt_son{music_id} - Live effect prefabs:
3d/effect/live/pfb_{effectName} - Stage prefabs:
3d/env/live/live{bgId}/pfb_env_live{bgId}_controller000
Python tools (tools/) — rebuilt 2026-08-04 after the old UmaCrack\ toolchain was deleted. Run with ~/.venvs/umatools/bin/python3 (needs UnityPy + apsw-sqlite3mc, not plain apsw; see tools/requirements.txt).
| Script | Use |
|---|---|
uma_common.py |
Library: key constants, decrypt_bundle_bytes(), MetaDb (path→hash, UnityPy load) |
dump_meta.py |
plain → out/meta_plain.db · find <LIKE> · info <path> (hash, dat path, deps, [NOT DOWNLOADED]) · songs |
dump_bundle.py |
list / tree / json / save / gameobjects, --deps |
dump_cutt_typetree.py |
Authoritative track schema. --fields <song> · --tree <field> <song> · --sample <field> <song> · --groups |
scan_live_tracks.py |
All 59 songs → out/scan_keys.csv, scan_groups.csv, scan_summary.txt, scan.json (~21 s) |
Notes: meta decrypts via sqlite3mc PRAGMA cipher='chacha20' + PRAGMA hexkey='<64 hex>' (the key=x'...' and raw: forms both fail); VACUUM INTO re-encrypts the target, so dump_meta.py plain copies schema+rows explicitly.
Cutt bundles ship full TypeTrees, so field names and keyframe counts from these tools are ground truth. All 70 worksheets across all 59 songs share one 128-field schema — no version drift. Only son<id>_camera and type_01..type_10 carry the trees; the cutt_son<id> prefab and data bundles are stripped.
Getting a track's real field name without the dump tools — Unity matches bundle TypeTree fields by name, case-sensitively. A field whose name doesn't match is never populated (it does not become null — Unity initialises every serialised List<T> to an empty list, so null-vs-empty tells you nothing). To test a candidate name, declare it on LiveTimelineWorkSheet and check whether it receives keys:
LiveTimelineWorksheetDiag.Probe(sheet, "candidateFieldName");
Unsure about casing? Declare both spellings side by side — only the correct one fills. This is how WashLightList (capital W) was confirmed; note upstream katboi01 uses washLightList, which never populates.
Live Timeline Architecture
The Live playback system is in Assets/Scripts/umamusume/Gallop/Live/:
Director.cs ← singleton, wires everything together
Cutt/
LiveTimelineControl.cs ← dispatches timeline events each frame (~1900 lines)
LiveTimelineWorkSheet.cs ← all track data fields (ScriptableObject)
LiveTimelineDataList/ ← one .cs per track type
UpdateInfo/ ← structs passed to event handlers
StageController.cs ← manages stage GameObjects, StageObjectMap
Track implementation pattern (repeat for each new track):
- Add data class in
LiveTimelineDataList/(extendLiveTimelineKeyWithInterpolatefor key, add group wrapper implementingILiveTimelineGroupDataWithName) - Add
[SerializeField] public List<...> trackList;toLiveTimelineWorkSheet - Add
public event Action<TData, TKey> OnUpdateXxx;inLiveTimelineControl - Call
AlterUpdate_SimpleListControl(workSheet.trackList, d => d.keys, OnUpdateXxx, _currentFrame)inAlterLateUpdate() - Subscribe
_liveTimelineControl.OnUpdateXxx += handlerinDirector.InitializeTimeline()
Important: LiveTimelineKeyWithInterpolate already declares frame, attribute, interpolateType, curve, easingType — do NOT redeclare these in subclasses.
Stage shader colour channels (enumerated at runtime via Shader.GetPropertyType, confirmed on stage live10149 / song 1177):
| shader | colour | brightness | other |
|---|---|---|---|
Gallop/3D/Live/Stage/DefaultNoAmbient |
_MulColor0 |
_ColorPower |
|
Gallop/3D/Live/Stage/DefaultEnvMapNoAmbient |
_MulColor0 |
_ColorPower |
_AddColor, _EnvMap |
Gallop/3D/Live/Stage/DefaultTransparentNoAmbient |
_MulColor0 |
_ColorPower |
_AmbientColor |
Gallop/3D/Live/Stage/LightBlinkBlend |
_BlinkLightColor |
_ColorPower |
_SrcBlend/_DstBlend |
Gallop/3D/Live/Stage/LightBlend / LightAdd1 |
_MulColor0, _MulColor1 |
_ColorPower, _ColorPowerMultiply |
|
Gallop/3D/Live/Stage/Laser |
_MulColor0, _MulColor1 |
_ColorPower |
_RandomValue |
Gallop/3D/Bg/BgMirrorBall |
_MulColor0 |
(none) | |
Gallop/3D/Live/Stage/StageMirrorBallShine |
(none) | ||
Gallop/3D/Live/Stage/StageTransmittedLightMask |
(none) | _TransmittedLightMaskScale |
Brightness is a separate channel — do not fold it into the colour. Write the key's colour to the colour property and its power to _ColorPower; let the shader combine them. Only fall back to colour * power where _ColorPower is absent (BgMirrorBall).
Dump any shader's real property table with:
# tools/, via ~/.venvs/umatools/bin/python3
env = MetaDb().load("shader") # 499 shaders
pf = obj.read_typetree()["m_ParsedForm"] # m_Name, m_PropInfo.m_Props
_MulColor0 is on every stage shader and is BgColor1's channel; _AmbientColor belongs to BgColor2. They are separate properties on the same shader, so the two tracks must not write the same one. Same naming family as WashLight's MulColor0 and UVScrollLight's mulColor1.
⚠️ A material's m_SavedProperties in the bundle lists properties it no longer has — it retains entries from whatever shader it was authored against. Material.HasProperty() asks the current shader. Always enumerate the shader, never trust the bundle's saved-property table.
Track group names are not always GameObject names. Four separate silent failures were traced to this in one session, so check the mapping before assuming a track is unimplemented:
- a whitelist filter in the dispatcher dropped 92% of BgColor1's keys (
validBgColorNames) StageObjectMapdedupes by name, so a crowd of 66 same-named objects only ever got its first member- the Object track's
neonsignis a_stageObjectUnitsunit name, not a GameObject — no object of that name exists ObjectUpdateInfo.OffsetTypewas populated by the dispatcher but never read byStageController, soAdd-relative positions were written as absolute
All four failed silently, with no error. Treat a track that "works" but looks wrong as a routing problem first.
StageObjectMap: Stage child GameObjects are indexed by name. Objects whose names match IsTimelineControlledLight() (blinklight, spotlight3d, _wash_, laser) start SetActive(false) — their handlers call SetActive(true) when the track fires. All other objects (neonsigns, glow meshes, UV scroll objects, etc.) keep their prefab default state.
Working rule: no ground truth, no implementation
Field names, keyframe values and shader property tables are all recoverable from the bundles
(tools/), so verify before you write code — and when something genuinely cannot be
recovered, leave it unimplemented with a TODO rather than guessing a value.
Guessing has cost real time in this project: the PostFilm vignette geometry was guessed twice
(full-screen wash, then a huge border) before it turned out the defining shader isn't shipped in
any bundle. PostFilmRendererFeature._enableRendering is now false for exactly this reason.
Note the distinction that has caught me out: "the property exists" is not "this field maps to
that property". _ColorPower is present on the stage shaders, but there is no evidence that
BgColor1's power field drives it — so that write was reverted while BlinkLight's was kept
(there the shader LightBlinkBlend is named for the track and pairs _BlinkLightColor with
_ColorPower, which is a much tighter fit).
Open items and why each is blocked are tracked in LIVE_TRACKS.md → 「已知未解问题」.
Currently Implemented Tracks
| Track | Data class | Notes |
|---|---|---|
| Camera (pos/lookat/fov/roll/switcher) | existing | fully working |
| CharaMotionSequence | existing | |
| Facial / LipSync / FormationOffset | existing | |
| GlobalLight (48) | existing | sets rim light shader props on characters |
| BgColor1 | existing | two branches. Groups named CharaCenter/CharaLeft/CharaRight/CharaColor (LiveTimelineControl.CharaBgColorNames) → character toon props (_CharaColor, _ToonDarkColor, …). Every other group name → stage renderers, resolved by walking the whole stage hierarchy for same-named Transforms (Director.ResolveStageTargets), writing _MulColor0 via MaterialPropertyBlock. |
| BgColor2 | existing | sets _AmbientColor on stage renderers via Lerp(color1, color2, value) |
| Transform / Object | existing | handled by StageController.cs |
| Effect (60) | LiveTimelineEffectData |
loads prefab from 3d/effect/live/pfb_{name} |
| GlobalFog (49) | LiveTimelineGlobalFogData |
sets RenderSettings.fog* |
| Spotlight3d (68) | LiveTimelineSpotlight3dData |
looks up keyData.assetName in StageObjectMap |
| UVScrollLight (46) | LiveTimelineUVScrollLightData |
sets texture UV on stage materials |
| VolumeLight (37) | LiveTimelineVolumeLightData |
data deserialized, no visual (component absent) |
| LightShafts (50) | LiveTimelineLightShaftsData |
data deserialized, no visual (component absent) |
| Particle (41) | LiveTimelineParticleData |
sets ParticleSystem.emission.rateOverTime |
| ParticleGroup (42) | LiveTimelineParticleGroupData |
sets FlickerLightRate |
| ChromaticAberration (73) | LiveTimelineChromaticAberrationData |
URP ChromaticAberration.intensity ← power;per-channel offset 无法映射 |
| HdrBloom (38) | LiveTimelineHdrBloomData |
dead code — 0/58 songs carry data (hdrBloomKeys empty in every scan and in the song-1177 dump). Safe to delete. |
| ColorCorrection (61) | LiveTimelineColorCorrectionData |
URP ColorAdjustments.saturation + ColorCurves RGB;depth/blend curve 无 URP 对应 |
| BlinkLight | LiveTimelineBlinkLightData |
SetActive + child Light color/intensity (56/58 songs). Biggest lighting payload by far — 全语料 19420 keys / 57 songs, and over half are named *_wash_* (wash_truss_a 147, wash_truss_b 147, wash_ground_a 51, …). color1Array / LightBlendMode / isReverseHueArray still unused. |
| WashLight | LiveTimelineWashLightData |
SetActive only (5/58 songs). Low value: real "wash light" output comes from the BlinkLight *_wash_* groups above, not this track — song 1177 has just 1 group / 11 keys here. |
| Laser | LiveTimelineLaserData |
SetActive + position/rotation/scale — blink/raycast not implemented (6/58 songs) |
Track Coverage (from 58-song scan)
The pre-2026-08-04 scan data in LIVE_TRACKS.md was wrong and has been re-measured with tools/. Two systematic errors: a batch of tracks marked "WorkSheet 无 X 字段" do have the field (MobControlKeys, CyalumeControlKeys, nodeScaleList, sweatLocatorList, monitorCameraPos/LookAtKeys, facialNoiseKeys, charaMotionNoiseKeys, …), and a batch marked "全 0 keyframe 空占位" carry thousands of keys (postFilmKeys/postFilm2Keys/postFilm3Keys ≈20 200 keys over 59/59 songs, radialBlurKeys, tiltShiftKeys, charaFootLightKeys, …). Rows tagged ✅实测 are trustworthy; untagged rows are still old data. Re-verify with tools/ before acting on any untagged row.
Coverage numbers measure what exists in the bundles, not what the C# consumes — the two diverge. When a track looks under-powered, check the dispatcher in AlterUpdate_* for filters before assuming it's unimplemented (BgColor1 was dropping ~92% of its keys that way).
Measuring what a song actually carries: LiveTimelineWorksheetDiag.Dump() is called from Director.InitializeTimeline() and logs, per worksheet, every track field with its group names and key counts. Confirmed on song 1177: worksheetList.Count == 1, SheetType == MainLive, so reading worksheetList[0] loses nothing.